Huawei EC 32x on Mac OSX [Relience Netconnect India] Drivers Available Here

30 Responses to “ Huawei EC 32x on Mac OSX [Relience Netconnect India] Drivers Available Here ”

1. 

   sree ram on March 29, 2008 at 5:26 am

   Hi,
   I recently bought a EC325 Huawei data card from Reliance and have installed the drivers as given above from the Hutch Thailand Site
   I have a MAcbook 10.5.1
   Initially the drivers got installed properly and i was able to see the huwaei mobile connect in my OS and at that time my connection was not activated
   After activating my connection i connected it and tried but i couldnt connect
   So i decided to remove the existing one and reinstall the drivers from the beginning but i am facing a problem here
   I dont see the Huawei mobile connect configured when i connect my data card after installing the drivers given above successfully
   Can you please let me know how to remove the drivers and reinstall them so that i can see the Huawei mobile connect when i reinstall the drivers
   Please let me know if i am missing something here
   Any help would be greatly appreciated
   Thanks and regards,
   Sree ram
2. 

   mtaram on March 29, 2008 at 1:19 pm

   well same happened with me and i reinstalled the drivers..
   and it worked for me…
   make sure the driver u install is correct and is for intel processor. U might by mistake have installed the powerpc version.

   you can download them from this post too.
   if u face any difficulties mail me.
3. 

   sree ram on March 29, 2008 at 3:30 pm

   Hi,
   I have unzipped the drivers i have downloaded from the link above.
   There were two of them and i have installed both of the packages and they install properly
   After installing them when i connect the usb modem
   nothing happens
   Should i go through any procedure for the USB Modem to be detected
   If yes, please let me know how to do that
   If i need to uninstall the drivers that are already installed how can i do that
   Answer to any of the above two Q`s will help me a TON
   Thanks and Regards,
   Sree ram
4. 

   mtaram on April 1, 2008 at 7:44 pm

   folllow the guide here the pictures have been added for reference. u need to do manual config.
   I bet u can do it its so easy…
   just foloow the pictures…
5. 

   Seeni on April 19, 2008 at 3:24 pm

   Hi,

   I bought Reliance data card EC 325 couple of days ago – i have installed and started using it successfully. But yesterday suddenly i got error like “Connection could not be established with your remote server – you need make changes in Network settings…”. I’ve double checked the datacard and it working fine, because i can make calls to mobile. I tried and check my IP address, but there is no ip found in my machine. i’m struggling to resolve this issue.

   My TP configuration : Windows XP on IBM T60

   your help is highly appreciated.! YOu can reply me at seenivasan_kittu@yahoo.com

   Thanks,
   Seeni
6. 

   iqbal on May 13, 2008 at 6:48 pm

   boss.u r d best.this is the second time i use this for same.god bless and thank u
7. 

   mtaram on May 15, 2008 at 2:14 pm

   thank u dude…. it feels nice to know that i am of help to someone….
8. 

   Zaheer on June 12, 2008 at 9:44 am

   Hi ,

   I have Macbook using Mac OS X Version 10.5.3, want to configure Reliance Neconnect Huawei EC 325, but after spending huge time could not configured the same….

   I have already followed the above steps but its not fruitful in my case
   kindly suggest the same..

   thanks
   Zaheer
9. 

   Zaheer on June 12, 2008 at 9:45 am

   Hi ,

   I ‘m using Mac OS X Version 10.5.3, want to configure Reliance Neconnect Huawei EC 325, but after spending huge time could not configured the same….

   thanks
   Zaheer
10. 

    Zaheer on June 12, 2008 at 9:45 am

    please suggest how can I do the same….
11. 

    Zaheer on June 12, 2008 at 10:56 am

    Hi ,
    I ‘m using Mac OS X Version 10.5.3, want to configure Reliance Neconnect Huawei EC 325, but after spending huge time could not configured the same….

    I have Leopard, and i think this driver is for only Tiger….. can you suggest me .

    info.zaheer@gamail.com
    Zaheer Khan
12. 

    iMaripurath on June 29, 2008 at 4:45 pm

    I have an internet modem of relience. But it does not work in Assam. What shall I do?
13. 

    iMaripurath on June 29, 2008 at 4:49 pm

    My Huawei modem is not working in Assam. What should I do for getting the internet connection. Please reply me.
14. 

    mtaram on June 30, 2008 at 2:10 pm

    Does reliance offer internet in assam plz check first and if it does go get a plan and if u have on then go talk to them… and let me know…
15. 

    ulgvr qptn on July 18, 2008 at 8:27 am

    gfzo qchtbfk cihyeovrm vpczyb gdmxvqjyz qzwxiots qcfjwakp
16. 

    Imran Khan on July 20, 2008 at 7:02 am

    Hi,
    I am using Intel based Mac OSx Leopard
    while installing Huawi drivers it is throwing error as Installation Failed
    Run preinstall script for Huawei Data Card
    Plz help me…..
17. 

    Jaydeep Ashara on August 19, 2008 at 1:39 pm

    hi,

    we have a huqwei Model : EC 325 we required his drivers please help us.
18. scanman’s core Mac hardware & apps. at scan man’s notes on August 31, 2008 at 12:47 am

    [...] USB CDMA modem that I borrow occasionally from the hospital when I go out of town & need to see some CT images [...]
19. 

    Venkat on September 10, 2008 at 1:29 am

    Hi

    Is there a Mac driver for Reliance ZTE CDMA 1X USB modem ?

    Thx

    Venkat
20. 

    sanjay tiwari on September 15, 2008 at 1:44 pm

    मैंने ड्राईवर डाउनलोड कर लिया. वह मेनू बार में दिखा भी रहा है लेकिन काम नहीं कर रहा. एकाउण्ट नंबर की जगह टेलीफोन नंबर रहेगा और पासवर्ड में भी टेलीफोन नंबर रहेगा यह तो पता है लेकिन आईएसपी नंबर में क्या लिखना है यह भी बताते तो अच्छा रहता.
    रिलायंसवाले साथ में एक कोड देते हैं जिसे *२२८ डायल करने के बाद डालना होता है. अब यह *२२८ कहां डायल करें
    थोड़ा और विस्तार से जानकारी देते तो उनको फायदा होता जो इस बारे में कुछ भी नहीं जानते.
21. 

    mtaram on September 16, 2008 at 9:51 am

    abe yaar ye *228 phone activation ke liye hota hai… so just activate ur connection first by simply connecting it to any windows system then use it on MAC OS.

    And tell me ki u r using it on windows or mac os?
22. 

    visfot on September 24, 2008 at 7:11 pm

    पांच सौ का घाटा सहने के बाद आपके ब्लाग पर जो जानकारी लेकर लौटा वह आपने पहले ही दे दी है कि पहले डाटाकार्ड को किसी विन्डोज आपरेटिंग सिस्टम पर चालू करो फिर यहां दिया गया डाउनलोड करो. अब जबकि आपका डाटाकार्ड पहले से एक्टिव है तो यहां उसकी कन्फीगरेशन कर दो. बस यह डाटा कार्ड एक्टिव करनेवाली प्रक्रिया आपकी जानकारी में मिसिंग थी जिसे अब आपने भी पूरा कर दिया. हिन्दी में जानकारी कुछ ऐसी होगी-
    १. रिलायंस डाटाकार्ड को किसी विन्डोज आपरेटिंग सिस्टम में एक्टिवेट करो क्योंकि यह सुविधा मैक में नहीं है.
    २. अब ऊपर जो कुछ बताया गया उसके हिसाब से सेटिंग कर लो.
    हो गया.

    ऐसी जानकारी के लिए धन्यवाद. लेकिन मैक मैकेनिक तो इतने के ही ५०० रूपये झटक लिए. चलिए आगे किसी नये यूजर की कुछ बचत हो जाएगी जो हमारे जैसा होगा.
23. 

    Kurien on September 30, 2008 at 3:23 pm

    Huwaei driver ver2.7 should work. I had it working for browsing however i was not able to send attachments Any suggestion for improving it would b welcome
24. 

    murali on October 15, 2008 at 2:16 pm

    where can i get the drivers for Reliance data card – Huwaii Ec 321

    thanks in advance,
25. 

    SRINI on November 2, 2008 at 6:03 pm

    man thanks it works for me.
26. 

    zakaria on November 5, 2008 at 5:47 pm

    merci pou le drivers de mac
27. 

    Net Booster on February 25, 2009 at 11:57 am

    Hello I am using Huwei 32X with Mac and its working fine but net speed is very slow, So I want to know if there is any software like net booster on Windows available for Mac OS X.

    Thanks in advance
    Net Bosster
28. 

    mtaram on March 2, 2009 at 6:59 am

    Relience promises 155kbps which is equal to 155/8 = 19 KB ps but anything near 8 or 10 KB ps is good enough. how much do u get… and it also depends upon the signal strength..
29. 

    pjain25 on April 19, 2009 at 6:09 am

    Can you please suggest me a CDMA USB device that can work with all countries CDMA USIM card along with MAC OS X 10.5.6 please suggest its really very urgent. mail me at pawanjain@gispl.com

    Thanks in advance
    Pawan
30. 

    mtaram on April 19, 2009 at 6:45 pm

    locate and delete the files. and if that doesnt work just reinstall once more… and see if it works.